Board Building

General discussions about kiting: equipment, setup tips, safety, where to go, where you should have been, lost and found
Post Reply
Wavebreaker
Posts: 14
Joined: Sun Dec 06, 2009 10:48 am

Board Building

Post by Wavebreaker »

Hi all
just thought i would post some pictures of boards im building.
I have met a couple guys now who have either built or want to build.
So i thought i would post for input.

First board build .. lite wind
cedar core
epoxy/flox rails.

any comments are appreciated.
more to follow once i turn it over and machine shape.
Attachments
8.JPG
8.JPG (67.68 KiB) Viewed 1869 times
6.JPG
6.JPG (55.45 KiB) Viewed 1869 times
4.JPG
4.JPG (67.81 KiB) Viewed 1869 times
3.JPG
3.JPG (58.63 KiB) Viewed 1869 times
jayracz
Posts: 27
Joined: Fri Oct 23, 2009 4:14 pm
Location: Port Alberni B.C.

Post by jayracz »

Nice touch with the epoxy rails. Keep the pics coming.Its like they say, a picture says a thousand words. I am learning tons from board building threads! :D
User avatar
GregK
Website Donor
Website Donor
Posts: 140
Joined: Fri May 25, 2007 8:52 pm
Location: Comox
Has thanked: 1 time
Been thanked: 1 time
Contact:

Post by GregK »

When you're ready to get fins for your boards, best value are from fins4sale.com ( http://fins4sale.com/index.php?cPath=2& ... bb970bcaee ) but get the 2-hole $10 ones, the $5 injection-molded plastic ones I'm told are poor. The $10 ones aren't bad, I got some of the 1.25" and 1.75" and the shapes are decent, and the material's solid. Only downside is the gloss finish, as I'm told a gloss finish is the worst for keeping water flow attached to the fin. But nothing a quick high-grit wet-sanding won't fix.
Wavebreaker
Posts: 14
Joined: Sun Dec 06, 2009 10:48 am

Post by Wavebreaker »

Thanks for the link
Wavebreaker
Posts: 14
Joined: Sun Dec 06, 2009 10:48 am

couple new shots.

Post by Wavebreaker »

boards on the vacuum table at this stage almost done
Attachments
13.JPG
13.JPG (67.31 KiB) Viewed 1703 times
9.JPG
9.JPG (51.83 KiB) Viewed 1703 times
240
Posts: 34
Joined: Sun Jul 19, 2009 7:13 am

Post by 240 »

Nice Job Kevin!!! Looks like a sweet shop on that ship.
Jordan
240
Posts: 34
Joined: Sun Jul 19, 2009 7:13 am

Post by 240 »

They even have Starbucks!
Wavebreaker
Posts: 14
Joined: Sun Dec 06, 2009 10:48 am

Post by Wavebreaker »

Ah at my age Starbucks keeps the brain active :)
Wavebreaker
Posts: 14
Joined: Sun Dec 06, 2009 10:48 am

A picture For JL in thanks for the link.

Post by Wavebreaker »

Again thanks for the link to the guys post on building a Hollow Mako.

Its a fun project so far
Attachments
bottom done just flipped it
bottom done just flipped it
28.JPG (62.02 KiB) Viewed 1716 times
frame done
frame done
20.JPG (60.44 KiB) Viewed 1716 times
User avatar
JL
Posts: 2610
Joined: Thu May 22, 2003 8:57 am
Location: Saanichton / Shirley (French Beach)
Been thanked: 2 times
Contact:

Post by JL »

Your most welcome ... Fine looking board !!! 8)
Thermals are good.
Post Reply