Sculpting
AJSpencer - Wingfoiling |
Monday July 17, 2023 1:42 PM |
Spot | Pat Bay |
Conditions | W 12-20, flat |
TOW | 1.5 hours |
Toys | 105 Axis Mast |
1010 Axis PNG | |
5.0 KT Jus D???orange DD | |
105 Quatro Wing Drifter | |
Details | Nothing sculpts a kidney stone like pre-session pizza! I knew I'd regret it' Little late for this wind probably, was really up and down with mostly down. The 5m DD is such a heavy awkward beast when underpowered so definitely should have had the 6.5 Slick instead which is also lighter. But worked well enough. Teflon tape on the fill valve threads did the trick on the leaky strut and did a soap test to make sure. Putting my journeyman plumbing skills to work. Low tide when I got there and just happened to be eel grass at that depth so took a long time and a gust to get off the shore.. Not the best but very glad to finally have some wind at my local beach after a very long unwanted break. One other winger and a windsurfer off of Ardmore and a kiter just coming in as I went out. [from Sailing Log on Monday July 17, 2023] |
Speed (3s average)
Speed | knots | km/h |
---|---|---|
Avg overall | 5.5 | 10.2 |
Avg in motion | 9.4 | 17.4 |
Max | 16.1 | 29.9 |
Max 100m | 15.8 | 29.4 |
Max 250m | 15.0 | 27.8 |
Max 500m | 14.3 | 26.4 |
Max 2s | 16.1 | 29.8 |
Max 10s | 15.9 | 29.4 |
Max Alpha (500/50m) | 7.6 | 14.0 |
Avg Foiling | 10.7 | 19.9 |
Times and Duration
Start | Mon Jul 17, 1:42 PM |
End | Mon Jul 17, 3:10 PM |
Duration | 01:27:15 |
In motion | 00:51:25 |
Paused (< 3 km/h) | 00:35:16 |
Foiling | 00:38:59 |
Not Foiling (< 8 km/h) | 00:47:42 |
Last Calculated | Mon Jul 17, 4:09 PM |
Track Information
Distance | 14.9 km |
# Trackpoints | 5080 |
Avg Trackpoint distance | 2.9 m |
Number of Turns | 52 |
Foiling Turns (> 8 km/h) | 1 |
Foiling Turn Percentage | 2% |
Category: Wingfoiling
one year ago
Created one year ago
AJSpencer
Please register/login to download this track.
This track was downloaded 0 time(s). |
Please wait while loading suggestions..
Please wait while loading suggestions..
You must login to post comments.