Kite tuneing guide
-
abetanzo
- Posts: 423
- Joined: Tue Sep 20, 2011 3:35 pm
- Location: Vic
- Has thanked: 1 time
- Been thanked: 2 times
Kite tuneing guide
I haven't had a chance to tune my kite & rig with an instructor yet, but thought I could make an effort to try out a different bar connection point other than the rear wing adjustments.
Any guidelines to follow or tips?
Also, I only have one set of bar and lines and two different kites. So probably need to adjust accordingly eh?!?
Any advice on kite tune? Greatly appreciated.
Any guidelines to follow or tips?
Also, I only have one set of bar and lines and two different kites. So probably need to adjust accordingly eh?!?
Any advice on kite tune? Greatly appreciated.
-
juandesooka
- Website Donor
- Posts: 704
- Joined: Mon Jun 07, 2010 3:44 pm
- Location: Sooke
- Has thanked: 3 times
- Been thanked: 11 times
- Contact:
I'm a kite kook, so I don't know much. But the two things I know:
1) both kites of mine has a "faster turn" and "slower turn" setting for rear lines. That's intuitive.
2) both kites are made to fly with all 4 lines equal length at full power. I was told to check the line length once in a while, especially with new lines, as the front lines will stretch.
Beyond that, let's see what the pros say.
1) both kites of mine has a "faster turn" and "slower turn" setting for rear lines. That's intuitive.
2) both kites are made to fly with all 4 lines equal length at full power. I was told to check the line length once in a while, especially with new lines, as the front lines will stretch.
Beyond that, let's see what the pros say.
What model and year of kites and bar do you have?
I modify most of my bars or make frankenstein bars all the time. But in general you can use any modern 4 line bar with any 4 line kite using pigtails to adapt for different kook proof systems. As far as bar width goes I use a 17" bar on a 10m delta kite for freeride, and a 20" bar on a 7m c-kite for loops. So it all depends on your style and what your goals are.
If you have a double depower, below the bar trim such as Naish, Slingshot, Liquid Force or Ocean Rodeo then I would just set the back lines on the tightest knot and trim out the difference. You'll learn to feel just the right amount of back line tension for every different wind condition or change in riding style. So get used to trimming all the time.
****Always test fly your new rigs in light wind.
I modify most of my bars or make frankenstein bars all the time. But in general you can use any modern 4 line bar with any 4 line kite using pigtails to adapt for different kook proof systems. As far as bar width goes I use a 17" bar on a 10m delta kite for freeride, and a 20" bar on a 7m c-kite for loops. So it all depends on your style and what your goals are.
If you have a double depower, below the bar trim such as Naish, Slingshot, Liquid Force or Ocean Rodeo then I would just set the back lines on the tightest knot and trim out the difference. You'll learn to feel just the right amount of back line tension for every different wind condition or change in riding style. So get used to trimming all the time.
****Always test fly your new rigs in light wind.
