Foil mounting thoughts

General discussions about windsurfing: equipment, setup tips, problems, where to go, where you should have been, lost and found
User avatar
grantmac
Posts: 263
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 6 times
Been thanked: 8 times

Post by grantmac »

Which foil and board were you using?
User avatar
winddude
Posts: 497
Joined: Sat Oct 17, 2009 11:01 am
Location: Dude, it's windy

Post by winddude »

Starboard 143 foilboard and I think starboards medium foil
Must ... Sail... More...
Lawrence <a href="http://www.winddude.com">'Wind Dude'</a> Stewart
User avatar
grantmac
Posts: 263
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 6 times
Been thanked: 8 times

Post by grantmac »

From what I've heard there are way different feels between the foils. Your experience sounds nothing like the Slingshot. It's more like riding a really turny board that steers with the least bit of pressure, but it can still do great angles.

Hence why I'm looking for a more freeride oriented board to go with it.
User avatar
winddude
Posts: 497
Joined: Sat Oct 17, 2009 11:01 am
Location: Dude, it's windy

Post by winddude »

I believe it. I think starboard is under the philosophyy you can swap between different wings and stabalizer to affect lift and agle of attack and the sligshot foil you can move the fusalage back and forth?

Probably going to see more adjustments in the future iterations.
Must ... Sail... More...
Lawrence <a href="http://www.winddude.com">'Wind Dude'</a> Stewart
User avatar
grantmac
Posts: 263
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 6 times
Been thanked: 8 times

Post by grantmac »

The Slingshot really only has two positions and they are quite vocal about the forward one being most optimum. You can set it up to ride off the rear foot but they consider that to be kind of a dead end past the beginning stages.

They are going to be launching some faster wings, carbon masts and more hydrodynamic fuselages.

I've gone and ordered the 4 bolt plate after thinking about how much work I want to put into a $120 board.
User avatar
juandesooka
Website Donor
Website Donor
Posts: 704
Joined: Mon Jun 07, 2010 3:44 pm
Location: Sooke
Has thanked: 3 times
Been thanked: 11 times
Contact:

Post by juandesooka »

Nsi will soon have a quick release mast plate for slingshot. Designed by stringy (Jim string fellow) in Oregon. Supposed to be lighter too. Releases with a cotter pin. May want to cancel your order and get one of those if not too late.
User avatar
grantmac
Posts: 263
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 6 times
Been thanked: 8 times

Post by grantmac »

$300 vs $62, might save 2 minutes and weighs an extra pound. I'll pass.
User avatar
juandesooka
Website Donor
Website Donor
Posts: 704
Joined: Mon Jun 07, 2010 3:44 pm
Location: Sooke
Has thanked: 3 times
Been thanked: 11 times
Contact:

Post by juandesooka »

grantmac wrote:$300 vs $62, might save 2 minutes and weighs an extra pound. I'll pass.
Are they seriously $300? That's crazy
User avatar
grantmac
Posts: 263
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 6 times
Been thanked: 8 times

Post by grantmac »

http://www.northshoreinc.com/store/pc/v ... tegory=205

I get that time is money, but damn.....
User avatar
juandesooka
Website Donor
Website Donor
Posts: 704
Joined: Mon Jun 07, 2010 3:44 pm
Location: Sooke
Has thanked: 3 times
Been thanked: 11 times
Contact:

Post by juandesooka »

Wow. I guess they are basing this off the liquid force pricing or other foils, where spare parts are obscene.

For whatever reason, the slingshot mast and base is by far cheapest on the market.
User avatar
grantmac
Posts: 263
Joined: Fri Jul 21, 2017 1:59 am
Has thanked: 6 times
Been thanked: 8 times

Post by grantmac »

Their wings are among the most expensive. Must be the socket mount.
All their other components seem reasonable however.
Post Reply