Sail pulleys

General discussions about windsurfing: equipment, setup tips, problems, where to go, where you should have been, lost and found
Post Reply
User avatar
Windjunky
Website Donor
Website Donor
Posts: 74
Joined: Wed May 16, 2018 12:18 pm
Location: Gordon Head
Has thanked: 5 times
Been thanked: 3 times

Sail pulleys

Post by Windjunky »

The pulley broke on one of my sails last night as I was derigging. Sail is fine .anyone replaced one of these. Can you knock out a pin to install? Can you buy new pulleys or have to rob one off older sail?
Back to Top
User avatar
Windjunky
Website Donor
Website Donor
Posts: 74
Joined: Wed May 16, 2018 12:18 pm
Location: Gordon Head
Has thanked: 5 times
Been thanked: 3 times

Post by Windjunky »

Oh I see ezzy makes a removeable one with cotter pin (ring) anyone have anything like that they want to sell?
Back to Top
User avatar
KUS
Website Donor
Website Donor
Posts: 2783
Joined: Fri Jan 02, 2004 8:32 am
Been thanked: 2 times

Post by KUS »

Chinook makes a grommet two piece screw together halves black plastic & steel pulley ...and I have a hook and pulley piece....if no main grommet then I dunno :idea:
Wish less, sail more!!
Vancouver Island Windsports
Chinook /Takuma /KA Australia (Tribal) /Aztron

You're either in or in the way....
Doing things the hard way since 1963....
Back to Top
User avatar
Windjunky
Website Donor
Website Donor
Posts: 74
Joined: Wed May 16, 2018 12:18 pm
Location: Gordon Head
Has thanked: 5 times
Been thanked: 3 times

Post by Windjunky »

There is no grommet on this one just a bunch of webbing with pulley sewn on. I see something similar at windspirit made by ezzy that should work not in a rush since I have the new goya sail same size, just thought I would fix this one to get bashed in waves and save new sail for foiling.
Back to Top
Post Reply

Return to “Windsurfing Discussion”