Board Construction?

General discussions about kiting: equipment, setup tips, safety, where to go, where you should have been, lost and found
Post Reply
Petoria
Posts: 6
Joined: Fri Apr 28, 2006 1:40 pm
Location: Victoria

Board Construction?

Post by Petoria »

Hey I'm new to the boards my name is Peter me and a couple buddies are just getting into the scene and were thinking about making a board and if any one had any knowledge on material/length/width/rocker/fin placement/ staps?and info on this stuff would help us out thanks.

-Peter
grab some sky touch some rail and get out there
Back to Top
User avatar
Gareth
Posts: 216
Joined: Fri Nov 05, 2004 9:05 am
Location: North Saanich

Post by Gareth »

If you are talking about a kiteboard, go to kitesurfing school in the links section, or: http://kitesurfingschool.org/board.htm

good luck.
Its all about the adventure and stoke!
Back to Top
User avatar
Russian Dood
Posts: 297
Joined: Mon May 03, 2004 11:06 am
Location: Still here, alive and kicking

Post by Russian Dood »

Although I'm not sure if you are not talking about ironing board, take a look here. That may help
Cancer must die!
Back to Top
Petoria
Posts: 6
Joined: Fri Apr 28, 2006 1:40 pm
Location: Victoria

Post by Petoria »

Hey guys thanks for thoes links i think i'm golden now !
grab some sky touch some rail and get out there
Back to Top
User avatar
more force 4
Sponsor
Sponsor
Posts: 1459
Joined: Wed Oct 15, 2003 8:57 am
Location: Victoria, BC
Has thanked: 23 times
Been thanked: 8 times
Contact:
Contact more force 4

Post by more force 4 »

Kiteboards don't have to be fancy to work (apparently: -- I wouldn't know myself since I don't kite :oops: ). Check out these from some poor students at MIT:
http://www.mit.edu/people/robot/zp/zeroprestige.html
Back to Top
TomS
Posts: 51
Joined: Thu Oct 14, 2004 3:41 pm
Location: Victoria

Boardbuilding links

Post by TomS »

Here is probably the best set of links on board building sail, surf, kite and even skim boards. Design and constuction methods included

http://www.viser.net/~anthwind/

My suggestion is for a composite construction vacuum bagged PVC (divinicell) foam core with epoxy / glass laminates.

I do have some materials and equipment to sell.
Every day of work takes 8 hours off your life.
Back to Top
User avatar
asscrack
Posts: 194
Joined: Fri Jan 30, 2004 5:51 am
Location: Dallas road

board building

Post by asscrack »

check this link>>>>> http://www.cabareteairforce.com/news/17 ... 08-02.html
ATTITUDE IS EVERYTHING and Life is a beach
Back to Top
User avatar
KUS
Website Donor
Website Donor
Posts: 2781
Joined: Fri Jan 02, 2004 8:32 am
Been thanked: 2 times

Post by KUS »

Johnny, I loved that link, quick load, good pix and flow, nice instruction and to the point commentary :P

Makes me want to order an EH, gotta like the emphasis on safety in the production process too and the attention to detail. Probably an expatriot sp? German or Swiss/ Austrian, right?? Lemme know if you are the rep or affiliate. 8)
Wish less, sail more!!
Vancouver Island Windsports
Chinook /Takuma /KA Australia (Tribal) /Aztron

You're either in or in the way....
Doing things the hard way since 1963....
Back to Top
User avatar
JL
Posts: 2610
Joined: Thu May 22, 2003 8:57 am
Location: Saanichton / Shirley (French Beach)
Been thanked: 2 times
Contact:
Contact JL

Post by JL »

I miss : 'stink works' & 'Wally boards' !!!
Thermals are good.
Back to Top
User avatar
asscrack
Posts: 194
Joined: Fri Jan 30, 2004 5:51 am
Location: Dallas road

board building

Post by asscrack »

Hey Kuz,He is from Euro,I'm not an affiliate, just want to sell my boards,so I want folks to see how well they are made and what is involved in the construction.See kitesurfing buy and sell.P.S I am putting those tuttle fin adapters in my van now.Cheers PPS I miss stink works too!
ATTITUDE IS EVERYTHING and Life is a beach
Back to Top
Post Reply

Return to “Kiteboarding Discussion”